Printer Initialization - Toshiba B-443 Owner's Manual

4.1.3 Printer Initialization

Printer initialization clears all downloaded files resident in flash memory, and
sets printer parameters to default values.
Parameter
MILEAGE
FLASH TIMES
CHECK SUM
SERIAL PORT
CODE PAGE
COUNTRY CODE
SPEED
DENSITY
SIZE
GAP(BLINE)
TRANSPARANCY
Please follow the steps below to initialize the printer:
1. Turn off the printer power.
2. Hold down the PAUSE and FEED buttons and turn on the printer power.
3. Do not release the buttons until the three LEDs flash in turn.
Note: Printing method (thermal transfer or thermal direct printing ) will be
set automatically at the activation of printer power.
Default Value
N/A
N/A
N/A
96,N,8,1
437 (8 bit), USA (7 bit)
001
2.0" /sec
09
N/A
N/A
05,05,05
22
Cleared by Initialization
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
EO1-33013