Table of Contents
Advertisement
CON550
6–2
6.2
Address Settings
6.3
Display Elements
LED Error
The ID of the CL550's mounting rack is set with both the 10-steps rotary
switches. Each mounting rack ID can only be given once in a controlling sys-
tem. It identifies each unit in the system unambiguously. The mounting rack
ID has already been reserved and shall not be assigned otherwise.
.
For further information, please refer to the Software Manual, CL550
Configuration and Commissioning.
LED display
LED red: Error
off
lit
Meaning
Normal operation
D after operating the RESET button on the ZS550
D during the Ethernet Switch IC's self test (power
on); after a successful self test, the LED goes off,
otherwise the module must be changed.
1070 072 263-101 (01.08) GB
Advertisement
Table of Contents
