Commissioning And Configuration; Project Configurator - Bosch CL550 Manual

7

Commissioning and Configuration

7.1

Project Configurator

1070 072 263-101 (01.08) GB
The project configurator is a software tool for the CL550 controller. It is called
from within the utility program WinSPS.
Call project configurator
The project configurator makes it possible for the user to define his/her own
system which can be interconnected with several other manufacturing sys-
tems.
For communication with the components of the system, the project configu-
rator uses the TCP/IP protocol. In order to ensure the correct operation of all
modules in the TCP/IP network, it creates a configuration file. The configur-
ation file contains the IP addresses and Ethernet parameters of the modules.
It will be loaded onto each of the system's module.
Commissioning and Configuration
7–1