Table of Contents
Advertisement
ZS550
5–16
5.5
Serial Interface X33 (ZS550-DP-IBS only)
Interconnecting cable
The X33 serial interface on the front of the ZS550-DP-IBS serves to couple
the CMD software for the InterBus-S. The interface cannot be addressed via
the applications program. The interface is provided with a 9-pin sub-D
socket.
The software CMD (IBS CMD SWT G4, version 4.5 or higher) by Phoenix
Contact is used to configure, parameterize and diagnose the InterBus-S.
The parameterization and configuration can be stored remanently on the in-
terface module.
6
7
8
9
Pin
1
2
3
4
5
6
7
8
9
In order to connect a diagnostic interface to a PC, an untransposed RS232
cable (not included in the delivery) can be used.
Assignment
Not assigned
Transmitted data TxD
Received data RxD
Not assigned
Station ground GND
Not assigned
Activate transmitter RTS (not used)
Clear to send (not used)
Not assigned
1070 072 263-101 (01.08) GB
1
2
3
4
5
Advertisement
Table of Contents
