Table of Contents
Advertisement
User's Manual
2. Some reproduced DVD picture may not be displayed when the display of the
computer and a CRT display are used at the same. Reduce the resolution, use
the display of the computer only, use the CRT display only or set display
device in the multi-monitor, then play DVD.
Please refer to External monitor in the online manual of Chapter8
Optional Devices or the application guide for the setting of each
display device.
3. The reproduced picture may be up and down slightly in some DVD titles when
reproduced by WinDVD 4.0. The swing can be suppressed by the following
procedure:
a. Boot up WinDVD 4.0 and click the circled part shown in figure B-3, then
select [Display] out of the list.
b. The following sub-panel is displayed, then click the circled part
shown in figure B-5.
B-12
Figure B-3 WinDVD 4.0
Figure B-4 WinDVD 4.0 Sub-panel
Advertisement
Table of Contents
