User's Manual
Cannot write correctly
DVD-R/-RW drive
For more information, refer to Chapter 4,
Problem
You cannot access
a CD/DVD in the drive
9-14
CD-ROM:
CD-DA, CD-Text, Photo CD™
(single/multi-session), CD-ROM
Mode 1, Mode 2, CD-ROM XA Mode
2 (Form1, Form2), Enhanced CD
(CD-EXTRA), CD-G (Audio CD only),
Addressing Method 2
Recordable: CD-R, CD-RW
CD
Check the region code on the DVD. It must
match that on the CD-RW/DVD-ROM drive.
Region codes are listed in the
section in Chapter 2, The Grand Tour.
If you have trouble writing, make sure you are
observing the following precautions:
• Use only media recommended by TOSHIBA.
• Do not use the mouse or keyboard during
writing.
• Use only the software supplied with the
computer for recording.
• Do not run or start other software during
writing.
• Do not jar the computer during writing.
• Do not connect/ disconnect external devices
or install/remove internal cards during writing.
If problems persist, contact your dealer.
Operating
Procedure
Make sure the drive's drawer is securely
closed. Press gently until it clicks into place.
Optical media
Basics.