Cd-Rw/Dvd-Rom Drive - Toshiba A40 Series User Manual

CD-RW/DVD-ROM drive

For more information, refer to Chapter 4,
Problem
You cannot access
a CD/DVD in the drive
Some CD/DVDs
run correctly, but
others do not
Hardware and system checklist
Check the region code on the DVD. It must
match that on the DVD-ROM drive. Region codes
are listed in the Optical media
2, The Grand Tour.
If problems persist, contact your dealer.
Operating
Procedure
Make sure the drive's drawer is securely
closed. Press gently until it clicks into place.
Open the drawer and make sure the CD/DVD is
properly seated. It should lie flat with the label
facing up.
A foreign object in the drawer could block laser
light from reading the CD/DVD. Make sure there
is no obstruction. Remove any foreign object.
Check whether the CD/DVD is dirty. If it is, wipe
it with a clean cloth dipped in water or a neutral
cleaner. Refer to Media care
for details on cleaning.
The software or hardware configuration may
be causing a problem. Make sure the
hardware configuration matches your software's
needs. Check the CD/DVD's documentation.
Check the type of CD/DVD you are using. The
drive supports:
DVD-ROM: DVD-ROM, DVD-Video
section in Chapter
Basics.
section in Chapter 4
9-13