Table of Contents
Advertisement
1.4
FX FLUIDS
The MAGICFX
SMOKEBUBBLE BLASTER uses bubble fluid and smoke fluid from MAGIC
®
FX to create smoke bubbles. The fluids are delivered in jerrycans. The 20 litre jerrycan
with bubble fluid is placed and connected in the bubble cabinet, see Section 3.2. The
5 litre jerrycan with smoke fluid is placed and connected in the smoke cabinet, see
Section 3.3. The sheet metal interiors of the cabinets hold the jerrycans in place.
Do not use other fluids than those that are approved and supplied by MAGIC FX, see
following table.
Code
Type of fluid
MFX3027
MAGICFX SMOKEBUBBLE BLASTER
MFX3003
MAGICFX
1.5
MANUAL MODE
In Manual mode the machine starts bubbling instantly when switched on. In the
menu on the display you can set the following values for Manual mode:
Manual operation menu items
Manual mode
Run timer
Pause timer
Reduced output
Smoke
Output distance
1.6
DMX CONTROL
When connected to DMX and with Manual mode OFF the MAGICFX
BLASTER is controlled with 1 safety address and 4 operational addresses:
DMX Address
Safety address
Start address (Bubble setting)
Start address + 1 (Smoke setting)
Start address + 2 (Fan speed)
Start address + 3 (Go trigger)
8 MAGICFX
SMOKEBUBBLE BLASTER — User and Installation Manual
®
PRO BUBBLE FLUID - READY TO USE
®
Values
ON / OFF
0 – 600 (s)
0 – 600 (s)
ON / OFF
0 % / 50 % / 100 %
0 – 255
Address range
1 – 512
1 – 509
2 – 510
3 – 511
4 – 512
- SMOKE FLUID
®
Manual mode
DMX addresses
Volume
5 litre
20 litre
Approved FX Fluids
SMOKEBUBBLE
®
Advertisement
Table of Contents
