Re)Place The Jerrycan With Smoke Fluid - Magicfx Smokebubble Blaster User And Installation Manual

3.3 (RE)PLACE THE JERRYCAN WITH SMOKE FLUID
WARNING
1 Make sure that the machine is not in operation (FX LED indicator is dimmed).
2
Open the smoke cabinet door. Disconnect and remove an empty jerrycan if
present.
3 Place a jerrycan with smoke fluid in the smoke cabinet and remove and save
the lid.
Always follow the instructions as noted on the jerrycans.
MAGICFX SMOKEBUBBLE BLASTER — User and Installation Manual
®
19