Magicfx Smokebubble Blaster User And Installation Manual page 27

6
Use the display and buttons to set the Manual mode to the following values:
Manual mode
Run timer
Pause timer
The machine starts flushing the bubble system with water from the jerrycan.
7
Wait until the machine does not generate bubbles anymore and only water is
coming out of the bubble heads.
8
Set Manual mode to OFF and switch the machine OFF.
9
Disconnect all DMX and power cable(s).
10 Disconnect and remove the jerrycan.
11
Connect the bubble lid inside the cabinet.
ON
600 s
0 s
MAGICFX SMOKEBUBBLE BLASTER — User and Installation Manual
®
Reduced output
Smoke
Output distance
OFF
OFF
0
27