Meet The Magicfx ® Smokebubble Blaster - Magicfx Smokebubble Blaster User And Installation Manual

1 MEET THE MAGICFX
The MAGICFX SMOKEBUBBLE BLASTER is a special effects machine that launches
®
bubbles (optionally filled with smoke) into the air with a capacity of 6 000 bubbles a
minute.
The MAGICFX SMOKEBUBBLE BLASTER pumps bubble fluid from a jerrycan to the
®
bubble heads. The bubble fluid leaves a bubble head through the double-walled
exterior. A servo-driven wiper frequently wipes the head. This creates a small
membrane on the head. The air from an overpressurized chamber behind the
bubble heads blows the air into the membrane. This creates a trail of bubbles from
the bubble head.
A pair of fans blow air into the chamber behind the bubble heads. This creates the
overpressure conditions in the chamber. Another pair of fans is positioned
underneath the heads. The controllable air flow from the fans will launch the bubbles
high into the air.
Optionally smoke fluid is pumped from a jerrycan, vaporized into smoke by two
heating elements and led to the bubble heads. The smoke output is located inside
the bubble head. The smoke from the output is mixed with the air that makes the
bubbles.
Unused bubble fluid from the bubble heads will fall into a drip tray. A drain and
connected hose transports the remains back into the jerrycan with bubble fluid.
The MAGICFX SMOKEBUBBLE BLASTER is outfitted for operation:
®
• in Manual mode with multiple options (e.g setting a timer and the output
distance);
• with DMX and optionally RDM;
• in sequence with multiple machines.
SMOKEBUBBLE BLASTER!
®
MAGICFX SMOKEBUBBLE BLASTER — User and Installation Manual
®
5