Configure Manual Mode; Bubble In Manual Mode - Magicfx Smokebubble Blaster User And Installation Manual

Table of Contents

Advertisement

3.4

CONFIGURE MANUAL MODE

1. Switch the machine ON (If Manual mode is ON, the machine starts bubbling
instantly).
2. Use the display and buttons to create the desired output in Manual mode, see
Chapter 1.
3. Make sure that Manual mode is ON and switch the machine OFF.
3.5

BUBBLE IN MANUAL MODE

1. Make sure that the prescribed safety zone is free from persons.
2. When it's time to bubble, switch the machine ON.
3. Enjoy the view!
4. To stop blasting bubbles:
Set Manual mode to OFF, or;
Switch the machine OFF (next time you switch the machine ON, it starts
bubbling again instantly).
MAGICFX
SMOKEBUBBLE BLASTER — User and Installation Manual
®
21

Advertisement

Table of Contents
loading

Table of Contents