Table of Contents
Advertisement
Quick Links
Blizzard, PO Box 245038, Milwaukee, WI 53224-9538 • www.blizzardplows.com
UNDERCARRIAGE KIT
International TerraStar 4X4
35111
Installation Instructions
CAUTION
Read this document before installing the
snowplow.
CAUTION
See your BLIZZARD
outlet/Web site for
®
specifi c vehicle application recommendations
before installation. The Undercarriage
Selection Guide has specifi c vehicle and
snowplow requirements.
A DIVISION OF DOUGLAS DYNAMICS, LLC
November 15, 2013
Lit. No. 43664, Rev. 00
2013 - __
Advertisement
Table of Contents
Related Manuals for Blizzard 35111
Summary of Contents for Blizzard 35111
- Page 1 Blizzard, PO Box 245038, Milwaukee, WI 53224-9538 • www.blizzardplows.com November 15, 2013 Lit. No. 43664, Rev. 00 35111 UNDERCARRIAGE KIT International TerraStar 4X4 2013 - __ Installation Instructions CAUTION Read this document before installing the snowplow. CAUTION See your BLIZZARD outlet/Web site for ®...
-
Page 2: Safety Definitions
SAFETY SAFETY DEFINITIONS WARNING/CAUTION & INSTRUCTION LABELS WARNING Become familiar with and inform users about the Indicates a potentially hazardous situation warning and instruction labels on the back of the that, if not avoided, could result in death or blade. serious personal injury. -
Page 3: Safety Precautions
SAFETY SAFETY PRECAUTIONS PERSONAL SAFETY Improper installation and operation could cause • Remove ignition key and put the vehicle in park or personal injury and/or equipment and property damage. in gear to prevent others from starting the vehicle Read and understand labels and the Owner's Manual during installation or service. -
Page 4: Torque Specifications
TORQUE SPECIFICATIONS NOISE TORQUE CHART Airborne noise emission during use is below 70 dB(A) CAUTION for the snowplow operator. Read instructions before assembling. Fasteners should be fi nger tight until VIBRATION instructed to tighten according to the torque chart. Use standard methods and practices Operating snowplow vibration does not exceed when attaching snowplow including proper 2.5 m/s... -
Page 5: Installation Instructions
UNDERCARRIAGE INSTALLATION INSTALLATION INSTRUCTIONS 2. For both sides, cut the cable ties to free the harness and remove the L-brackets as shown below. Retain all bracket parts for reinstallation. NOTE: For easier assembly and installation, Use caution not to damage the brake cable and vehicle and all snowplow components should hose running from the L-shaped bracket to the be on a smooth, level, hard surface, such as... - Page 6 UNDERCARRIAGE INSTALLATION 5. Position the front mount as shown. On the 8. Position the rear end of the passenger-side thrust passenger's side, Loosely attach the front mount arm as shown and attach using 1/2" x 2" cap using 1/2" x 2" and 1/2" x 2-1/2" cap screws and screws and locknuts.
- Page 7 UNDERCARRIAGE INSTALLATION 11. Attach the rear end of the driver-side thrust arm as 14. Tighten all fasteners according to the torque chart, shown using 1/2" x 2" cap screws and locknuts. starting with the vehicle to frame fasteners, front to back, and fi nishing with the thrust arm to mount fasteners.
- Page 8 UNDERCARRIAGE INSTALLATION MOUNT ADAPTER MEASUREMENT MOUNT ADAPTER INSTALLATION With the vehicle on level ground, measure from the Install adapter plates as follows: ground to the center of the hole on the U-bracket side plate on the mount. 1. Position the adapter plate against the driver's side portion of the mount adapter as shown.
- Page 9 Lit. No. 43664, Rev. 00 November 15, 2013...
- Page 10 Blizzard or the vehicle manufacturer may require or recommend optional equipment for snow removal. Do not exceed vehicle ratings with a snowplow. Blizzard offers a limited warranty for all snowplows and accessories.