Long Workpiece Support; Additional Workpiece Support - Bosch CM10GD Operating/Safety Instructions Manual

2610051885.qxp_CM10GD 12/3/18 8:49 AM Page 35
▶ Workpiece Support

▼ LONG WORKPIECE SUPPORT

unless clamped
supported from underneath.
Operating
extensions provide extra workpiece support
and are especially useful when cutting long
workpieces. To reposition the extensions,
simply unlock the base extension lock levers,
reposition the extensions and relock the
levers (see Figure 35a). The left extension
lock lever tightens by rotating clockwise and
the right lock lever tightens by rotating
counterclockwise.
Sliding Base
Extension
Lock Lever
Figure 35a. Sliding Base Extensions
Preparing for Saw Operations
Long workpieces have a
tendency to tip over
down and properly
Base Extensions –
Sliding Base Extension

▼ ADDITIONAL WORKPIECE SUPPORT

Blocks – Long pieces need extra support.
The base height (3-3/4") is designed to match
the standard lumber of two 2xs and one 1x.
Boards of these thicknesses can be used to
create auxiliary support extensions for long
workpieces (see Figure 35b).
These
Add Two 2xs
and One 1x
Figure 35b. Block Support
35