Toshiba RAS-B07J2KVSG-E Service Manual page 114

No. Part name
7 Drain pan
1) Follow the procedure item 3 .
assembly
2) Remove screw holding the electric part cover.
Procedures
P.C.board
Louver motor
connector
3) Disconnect the louver motor connector (5P)
from P.C. board assembly.
4) Remove fixing screws of the unit display
and remove unit display.
Center arm
of drain pan
Back body
5) Remove the drain pan from the back body.
<To re-installation>
- Press the drain pan into the back body
- Please make sure ribs of drain pan in left
and right side must be install to lock position.
- Press the center arm of drain pan to back
body.
Back body
Rib of drain pan
Drain pan
Louver motor
connector
Drain pan
Center arm
of drain pan
Back body
- 114 -
Remarks
Screw
Electric part cover
Unit display
Back body
Rib of drain pan
Drain pan
Connectors
Screw