Replace The Cleaning Sleeve - Entrust Datacard CR8 Series Cleaning Manual

Replace the Cleaning Sleeve

The cleaning sleeve removes dust and other particles from cards before
they move into the printer. Replace the cleaning sleeve each time you
change the ink ribbon. Refer to the
for additional information.
1. Remove the ink ribbon (C1) cartridge from the printer (refer to
"Before You Begin" on page
2. Lift up the cleaning spindle handle (C3) and pull it straight out from
the printer.
3. Remove the used cleaning sleeve from the cleaning spindle and
discard it.
4. Slide the new cleaning sleeve onto the cleaning spindle.
527983-001_C
"Cleaning Schedule" on page 4
6).
C3
Cleaning
Sleeve
Cleaning
Spindle
Cleaning Guide
15