Tuning Into A Station; Station Seek Tuning; Tuning Into Stations Manually; Selecting Stored Stations - Blaupunkt HAMBURG MP57 Operating Instructions Manual

each. The FM waveband features 3 memory
banks each with 5 memory locations each:
FM1, FM2 and FMT .
u
In the "TUNER" menu, press the BAND
2
button to switch between the wave-
bands or memory banks:
FM1 FM2
You can now perform the following actions
in this waveband/memory bank :
•

Tuning into a station

•
Storing stations
Tuning into a station
There are three ways of tuning into a sta-
tion:
•
Tuning into stations automatically (sta-
tion seek tuning)
•

Tuning into stations manually

•

Selecting stored stations

Station seek tuning

u
Press the rocker switch
If you press and hold the rocker switch
=
or , automatic seek tuning skips
the stations found until you release the
rocker switch again.
The tuner searches for the next receiva-
ble station in the current waveband. The
adjusted sensitivity of the station seek
tuning (section "Changing the seek tun-
FMT MW
=
or .
ing sensitivity") and your settings are
taken into consideration:
•
The "PTY ON" setting in the "TUNER"
menu: The tuner searches for stations
that are broadcasting the defi ned
programme type.
•
Setting
LW
short): The tuner sets only traffi c in-
formation stations.
Note:
These settings are available only for FM.
An exact description of these settings
can be found in the following sections of
this chapter.
Tuning into stations manually
Notes:
•
Tuning into stations manually is pos-
sible only if the convenient RDS func-
tion is deactivated.
•
If you activated the "RDS ON" setting
(TRAF button
can scroll through broadcasting net-
works that have previously been re-
ceived with this device.
To change the frequency in increments of
100 kHz:
u
Press the rocker switch or
Selecting stored stations
u
Select the desired waveband or memo-
ry bank with the BAND button
u
Press one of the station buttons
Tuner mode
;
(TRAF button press
;
press long), you
:
.
2
.
9
.
83