Changing Volume Presettings (Volume Menu); Changing The Presetting Of The Power-On Volume (On Volume/ Last Volume); Changing Volume Presettings For Ta, Tel And Mute - Blaupunkt HAMBURG MP57 Operating Instructions Manual

Changing volume presettings
(VOLUME MENU)
The following presettings can be changed in
the Volume menu:
•
Power-on volume (ON VOLUME)
•
Volume presettings of traffi c announce-
ment (TA VOLUME), telephone/naviga-
tion announcement (TEL VOLUME) and
Volume reduction (MUTE LEVEL)
•
Signal tone (BEEP ON/OFF)
•
Speed-dependent volume increase
(AUTO SOUND)
VOLUME MENU
CD·C
USER MENU
mp3
To call up the "VOLUME" menu:
u
Press the MENU/OK button
u
Press the rocker switch
peatedly until "VOLUME MENU" appears
on the display.
u
Press the rocker switch
the menu.
The "VOLUME" menu appears.
Changing the presetting of the power-on
volume (ON VOLUME /LAST VOLUME )
The device is factory set to play the previ-
ously used volume after switch-on (but not
to exceed the value 38). You can change the
power-on volume.
u
In the Volume menu, press the rocker
=
switch or
VOLUME" is displayed.
MIX
ROCK
POP
CLAS
RPT
?
.
=
or re-
:
to open
repeatedly until "ON
u
Press the rocker switch
the menu.
u
Switch between the settings with the
rocker switch or
•
"LAST VOLUME" (power-on volume
same as switch-off) or
•
"ON VOLUME" (presetting the pow-
er-on volume)
If you selected "ON VOLUME":
u
Adjust the desired volume with the rock-
er switch or
Changing volume presettings for TA, TEL
and MUTE
If the device switches a traffi c announce-
ment, phone call or navigation announce-
ment, it always starts with the volume pre-
set here.
In addition, you can assign a lower vol-
ume up to the value 0 (mute) to the volume
reduction (MUTE).
u
In the Volume menu, press the rocker
=
switch or
menu items are displayed:
•
"MUTE LEVEL ": Presetting the volume
of the volume reduction
•
"TEL VOLUME ": Presetting the vol-
ume of the phone call/navigation
announcement
•
"TA VOLUME ": Presetting the volume
of the traffi c announcement
u
Press the rocker switch
the setting.
User settings
:
to open
:
.
=
(levels 0 to 66).
repeatedly until these
:
to display
109