Exposure Lamp Replacement - Ricoh FW 810 Service Manual

6 January 1990

2.2 EXPOSURE LAMP REPLACEMENT

1. Open the upper unit.
2. Remove the middle
left and middle right
covers.
3. Remove the expo-
sure glass. (4
screws)
4. Remove the left
lamp socket [A] (2
screws) and discon-
nect the 2p [B] and
3p [C] connectors.
5. Remove the left
lamp holder [D]. (2
screws)
6. Slide the exposure
lamp to the left and
remove it from the
machine.
7. Remove the heater
[E] from the lamp
and install it on the
new lamp.
8. Reassemble the ma-
chine.
[A]
[B]
[D]
[E]
5-4
[C]