Ricoh FW 810 Service Manual page 139

4. Remove the toner
sensor wire har-
ness [C] from the
cover plate clamp,
and remove the
two cover plates
[D][E] (3 screws).
5. Remove the front
exposure glass
holder [F]
(4 screws).
6. Measure the doctor
gap with the DG
gauge [G] and ad-
just the gap by turn-
ing the two screws
indicated in the illus-
tration.
[E]
[D]
[C]
[F]
[G]
5-17
6 January 1990