Table of Contents
Advertisement
6 January 1990
8. Remove the middle
left cover, top left
cover, left horizon-
tal cover, left inner
cover, and lower
left cover [A] (6
screws).
9. Loosen the timing
belt and remove
the bracket [B] (5
screws).
10. Open the exit
guide unit and re-
move the left and
right slider plate
screws (1 screw
for each plate).
11. Disconnect the two
exit guide unit con-
nectors; then,
slide the exit guide
unit to the right
and pull it out from
the main frame.
5-40
[A]
[B]
Advertisement
Table of Contents
