Table of Contents
Advertisement
4. Reset the cleaning
blade by pulling the
release lever [G] to-
wards the front side.
5. Close the middle
unit and open the re-
tention unit.
6. Open the toner car-
tridge cover [H].
7. Place a level [I] in
the space between
the cartridge cover
and the developer
entrance.
8. Adjust the level of
the machine by turn-
ing the bolts on the
4 machine feet.
3.3 SUPPLYING DEVELOPER (3 kg)
1. Open the original
feed unit and the
toner cartridge
cover [A].
2. Remove the sponge
seal [B] from the de-
veloper entrance.
3. Plug the power sup-
ply cord into the
wall outlet (socket).
G
H
3-9
6 January 1990
I
A
B
Advertisement
Table of Contents
