Advanced Bios Setup - PCchips M811LU Manual

Video (EGA/VGA)
This item defines the video mode of the system; you must leave
this item at the default value.
Halt On (All, But keyboard)
This item defines the operation of the system POST (Power On
Self Test) routine. You can use this item to select which types of
errors in the POST are sufficient to halt the system.
Base Memory, Extended Memory, and Total Memory
These items are automatically detected by the system at start up
time. These are display-only fields. You cannot make changes to
these fields.

Advanced BIOS Setup

This screen contains industry-standard options additional to the
core PC AT BIOS.
Phoenix – AwardBIOS CMOS Setup Utility
CPU Internal Cache
External Cache
CPU L2 Cache ECC Checking
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
ATA 66/100 IDE Cable Msg
Typematic Rate Setting
x Typematic Rate (Chars/Sec)
x Typematic Delay (Msec)
Security Option
OS Select for DRAM>64MB
↑ ↓ → ← : Move
Enter : Select
F5:Previous Values
Advanced BIOS Setup
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Floppy]
[HDD-0]
[CD-ROM]
[Enabled]
[Disabled]
[Enabled]
[On]
[Fast]
[Enabled]
[Disabled]
6
250
[Setup]
[Non-OS2]
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults
24
Item Help
Menu Level
Allows you to choose
the VIRUS warning
feature for IDE Hard
Disk boot sector
protection. If this
function is enabled
and someone attempts
to write data into this
area, BIOS will show a
warning message on
screen and alarm beep
F1:General Help
F7:Optimized Defaults