Advanced Bios Features Setup Option - PCchips M757MR Manual

Drive A and Drive B
These items define the characteristics of any diskette drive attached to the
system. You can connect one or two diskette drives.
Floppy 3 Mode Support
Floppy 3 mode refers to a 3.5" diskette with a capacity of 1.2 MB. Floppy 3 mode
is sometimes used in Japan.
Video
This item defines the video mode of the system. This mainboard has a built-in
VGA graphics system so you must leave this item at the default value.
Halt On
This item defines the operation of the system POST (Power On Self Test) routine.
You can use this item to select which kind of errors in the POST are sufficient to
halt the system.
Base Memory, Extended Memory, Total Memory
These items are automatically detected by the system at start up time.

Advanced BIOS Features Setup Option

This option displays a table of items which defines more advanced
information about your system. You can make modifications to most of
these items without introducing fatal errors to your system. Note that the
page has a scroll-bar to scroll down to more items.
Default: 1.44M, 3.5 in., None
Default: Disabled
Default: EGA/VGA
Default: All Errors
43