Ingersoll-Rand 99V Series Maintenance Information
Air grinder
Hide thumbs
Also See for 99V Series:
- Product information (56 pages) ,
- Operation and maintenance manual (27 pages) ,
- Product information (16 pages)
Subscribe to Our Youtube Channel
Related Manuals for Ingersoll-Rand 99V Series
Summary of Contents for Ingersoll-Rand 99V Series
- Page 1 16573370 Edition 2 February 2014 Air Grinder 99V Series Maintenance Information Save These Instructions...
- Page 2 Product Safety Information WARNING • Failure to observe the following warnings, and to avoid these potentially hazardous situations, could result in death or serious injury. • Read and understand this and all other supplied manuals before installing, operating, repairing, maintaining, changing accessories on, or working near this product.
- Page 3 Disassembly of the Throttle and Inlet for Models with a 5/16” (8 mm) built-in oiler Place the Cylinder Case in the vise to remove the Inlet Bushing (5) and Inlet Bushing Screen (5A). Drive out the Throttle Lever Pin (14) to release the Lever Assembly (15).
- Page 4 NOTICE NOTICE The Rotor should slip fit over the Arbor. If tightness is detected, The Controller has a left-hand thread. lightly polish one long side of the Key using fine emery cloth 10. Slip the Controller Assembly over the arbor aligning the Dowel on a hard, flat surface.
- Page 5 2. Test the Grinder motor for power to determine these minimum 4. There must be no leaks past the closed Throttle that will run the performance levels. The Throttle Lever must not be actuated motor. repeatedly during the test. Depress the Lever and hold it in the 5.
- Page 6 Notes:...
- Page 7 Notes:...
- Page 8 ingersollrandproducts.com © 2014 Ingersoll Rand...
Need help?
Do you have a question about the 99V Series and is the answer not in the manual?
Questions and answers