O
PERATION
DMX Channel Assignments and Values
3-CH
C
F
HANNEL
UNCTION
1
Dimmer
2
Strobe
Dimmer Speed
3
Mode
1-CH (cont.)
C
F
HANNEL
UNCTION
1
Dimmer
Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
Dimmer
To set the dimmer value, do the following:
1.
Press <MENU> repeatedly until U-- shows on the display.
2.
Press <ENTER> and Uxxx will show on the display.
3.
Use <UP> and <DOWN> to increase or decrease the dimmer value.
4.
Press <ENTER>.
Strobe
To set the dimmer value, do the following:
1.
Press <MENU> repeatedly until S-- shows on the display.
2.
Press <ENTER> and Sxxx will show on the display.
3.
Use <UP> and <DOWN> to increase or decrease the strobe value.
4.
Press <ENTER>.
Dimmer Profiles
This setting determines how fast the output of the EVE E-50Z changes when you modify the values of the
dimmer fader. This setting provides three different options to simulate the dimming curve of an
incandescent lighting product.
To set a dimmer profile, do the following:
1.
Press <MENU> repeatedly until dIn shows on the display.
2.
Press <ENTER>.
3.
Use <UP> and <DOWN> to choose a dimmer profile (dIn1, dIn2, dIn3. or OFF).
4.
Press <ENTER>.
Fan Mode
This option toggles the fan speed from being always on and auto control based on the products
temperature.
1.
Press <MENU> repeatedly until FAN shows on the display.
2.
Press <ENTER>.
3.
Use <UP> and <DOWN> to choose between AUTO and ON.
4.
Press <ENTER>.
EVE E-50Z User Manual Rev. 1
V
ALUE
000
2 55
0-100%
000
0 10
No Function
011
2 55
Strobe (slow to fast)
000
0 51
Dimmer speed set from Display
052
1 01
Dimmer Speed Mode Off
102
1 52
Dimmer Speed Mode 1 - fast
153
2 03
Dimmer Speed Mode 2 - medium
204
2 55
Dimmer Speed Mode 3 - slow
V
ALUE
000
2 55
0-100%
P
/S
ERCENT
ETTING
P
/S
ERCENT
ETTING
Page 9 of 13