ADC SG-1 User Manual page 65

June 30, 2006
The destination ip address to ping.
[-c <number>]
The number of echoes.
[-i <number>]
The number of wait seconds.
[-s <number>]
The number of bytes.
[atm]
The ATM interface.
[atm <slot number>]
The ATM slot number (ATM uses slot 2).
[atm <atm port number>]
The ATM port number (either port 1 or port 2).
[atm <sub-interface number>]
The ATM sub-interface number.
[atm <vpi number>]
The ATM vpi number.
[atm <vci number>]
The ATM vci number.
[atm (end-loopback)]
Verifies end-to-end PVC integrity.
[atm (repeat <number of echoes>]
The number of echoes to be sent.
Example(s)
Host> ping -c 5 -i 5 -s 500 155.226.20.250
Press <Ctrl C> to abort.
508 bytes from 155.226.20.250:icmp_seq=1 ttl=63 time<20 ms
508 bytes from 155.226.20.250:icmp_seq=2 ttl=63 time<10 ms
508 bytes from 155.226.20.250:icmp_seq=3 ttl=63 time<10 ms
508 bytes from 155.226.20.250:icmp_seq=4 ttl=63 time<10 ms
508 bytes from 155.226.20.250:icmp_seq=5 ttl=63 time<20 ms
Host>
SG1-UM-8500-03
Chapter 6: First-Level Commands
6-29