Table of Contents
Advertisement
Chapter 6: First-Level Commands
Displaying show mpls-labels commands
Host> show mpls-labels
It displays the incoming labels binding received from the neighbors and the out-going label binding distributed by the
system. When no specific FEC is defined, the system shows all FECs.
Usage
Show mpls-labels <standard | vc> <out | in> [<FEC identifier>]
Parameter(s)
<standard | vc>
Standard labels are the first labels on the stack, while vc labels (tunnels) are the second lable on the stack.
<out | in>
Lables that are out-going or incoming.
<FEC identifier>
It is the FEC (Forward Equivalence Class) identifier.
Note:
The system default value is 0 (which means all FECs).
Example(s)
Standard in:
Host>
show labels standard in
FEC ID
IP destination FEC
1
192.168.1.0/24
2
212.8.1.0/24
Standard out:
Host>
show labels standard out
FEC ID
IP destination FEC
1
192.168.1.0/24
2
212.8.1.0/24
6-24
Label
Next-Hop
123876
10.0.1.8
1034
10.0.1.3
Label
123876
1034
June 30, 2006
Interface
Ethernet 1
Ethernet 1
SG1-UM-8500-03
Advertisement
Table of Contents
