ADC SG-1 User Manual page 129

June 30, 2006
Using the ip dhcp relay information option command
Host(config)# ip dhcp relay information option
The ip dhcp relay information option command enables the system to insert a DHCP relay agent information option
in forwarded BOOT REQUEST messages to the DHCP server.
Usage
ip dhcp relay information option <Ethernet | VLAN | ATM | default> <slot>\<port num-
ber>\[sub-interface number] <priority> <ATM | WLAN>
Parameter(s)
Parameter
<port number>
<sub-interface number>
<priority>
Example(s)
Host(config)# no ip dhcp relay server Ethernet 0 \ 1 2
Host(config)# no ip dhcp relay server Atm 2 \ 1 \ 33 5
Host(config)# no ip dhcp relay server VLAN 1 \ 2 3 5
Host(config)# no ip dhcp relay server Default 0 \ 1 \ 4 8
Using the no ip dhcp relay information option command
Host(config)# no ip dhcp relay information option
Usage
no ip dhcp relay information option <Ethernet | VLAN | ATM | default> <slot>\<port
number>\[sub-interface number] <priority>
For parameters and examples, see
SG1-UM-8500-03
Table 7-12. ip dhcp relay information parameters
Description
Physical port number.
Sub interface number.
DHCP server priority.
"Using the ip dhcp relay information option
Chapter 7: Second Level Commands
Legal values / range
1 - 2
1- 4095
1- 10
command".
7-49