Igmp Commands - ADC SG-1 User Manual

June 30, 2006
IGMP C
OMMANDS
Using the ip igmp proxy command
Host(config)# ip igmp proxy upstream-interface
The ip igmp proxy upstream-interface command enables the IGMP Proxy capabilities on a specific upstream
interface. When the upstream interface is not configured, the system does not support the IGMP proxy capability.
Additionally, the command enables you to add or change the IGMP Proxy upstream interface.
Note: Only routed ATM interfaces are allowed to be upstream interface.
Usage
ip igmp proxy upstream-interface <Ethernet | ATM | VLAN> <slot>\<port number>
[\sub-interface]
Parameter
<slot>
<port number>
<sub-interface number>
Example(s)
Host(config)# ip igmp proxy upstream-interface Ethernet 0 \ 1
Host(config)# ip igmp proxy upstream-interface Atm 2 \ 1 \ 3
Host(config)# ip igmp proxy upstream-interface VLAN 1 \ 2 54
Using the no ip igmp proxy command
Host(config)# no ip igmp proxy upstream-interface
The no igmp proxy upstream-interface command disables the IGMP Proxy capabilities.
Usage
no igmp proxy upstream-interface <Ethernet | ATM| VLAN> <slot>\<port number>
[\sub-interface]
SG1-UM-8500-03
Table 7-13. ip igmp proxy command parameters
Description
PMC slot number.
Physical port number.
Sub interface number.
Chapter 7: Second Level Commands
Legal values/range
0 - 1
1 - 2
1- 4095; Default value 0
7-51