About This Manual; Introduction; Organization; Intended Audience - ADC SG-1 User Manual

A T M
BOUT HIS
I
NTRODUCTION
This manual applies to ADC's Service Gateway (SG) system, hereafter referred to as "SG-1." This document
includes an overview of the platform, installation procedures, and an SG-1 commands reference.
O
RGANIZATION
This manual includes the following chapters:
Chapter
Chapter 1: Overview
Chapter 2: Installation
Chapter 3: Command-Line Interface (CLI)
Chapter 4: Accessing the Command Line
Interface
Chapter 5: Using the Command Line Interface
Chapter 6: First-Level Commands
Chapter 7: Second Level Commands
Appendix A: SG-1 Vendor-Specific Attributes
Appendix B: Redirection Server
Appendix C: Product Support
Glossary
I A
NTENDED UDIENCE
This manual is intended for anyone needing to operate, administer, or maintain ADC's line of Service Creation
Gateway products.
SG1-UM-8500-03
ANUAL
Details features and pre-installation requirements for the SG-1
platform, including site requirements for power and cabling.
Provides detailed procedures for installing SG-1.
Describes the SG-1 Command-Line Interface (CLI), the steps to
access the CLI, and the steps to perform initial configuration
using the CLI.
Details how to log on locally to an SCC or rear I/O port (if a rear
I/O card option is used) and set an IP address to allow for remote
management via a Telnet session.
Describes how to access the command-line interface; it also
directs you to other manuals for administering, configuring, and
managing the SG-1.
Defines the commands available at the first command level of
each SCC.
Defines commands available at the second command level.
Describes the vendor-specific attributes related to SG-1 EDS
architecture.
Explains how ADC's product redirects all peers' HTTP requests
to their personal sites as predefined in the Radius Server.
Provides information on how to contact the ADC Technical
Support group.
Defines abbreviations and acronyms for the SG-1 Service
Gateway system.
Description
xi