In situations where the projector is out-of-range of a wireless network (for example while on a camping trip), you can configure the projector to act as

a wireless hotspot to create a closed network for devices to connect directly to the projector via a wireless connection and to project files from their

local storage.

The projector will have no access to the Internet while in wireless hotspot mode.

To create a wireless hotspot:

1. Install the wireless dongle provide into the wireless dongle port (see

Installing the wireless dongle on page

30).

2. Power on the projector (see

Starting up the projector on page

33).

3. On the home screen of the BenQ Launcher interface, press the down arrow key

on the remote control three times to navigate to the

settings menus.