Download Print this page

Husqvarna AME 1600 Operator's Manual page 5

Hide thumbs

Advertisement

Power tools are dangerous in the hands of untrained
users.
Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool´s operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
Service
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is
maintained.
Never service damaged battery packs. Service of
battery packs should only be performed by the
manufacturer or authorized service providers.
General safety instructions
WARNING: Read the warning instructions
that follow before you use the product.
This product is a dangerous tool if you are not
careful or if you use the product incorrectly. This
product can cause serious injury or death to the
operator or others. Before you use the product, you
must read and understand the contents of this
operator's manual.
Save all warnings and instructions.
Comply with all applicable laws and regulations.
The operator and the employer of the operator must
know and prevent the risks during operation of the
product.
Do not let a person operate the product unless they
read and understand the contents of the operator's
manual.
Do not operate the product unless you receive
training before use. Make sure that all operators
receive training.
Do not let a child operate the product.
Only let approved persons operate the product.
The operator is responsible for accidents that occur
to other persons or their property.
1154 - 001 - 05.03.2020
Do not use the product if you are tired, ill, or under
the influence of alcohol, drugs or medicine.
Always be careful and use your common sense.
This product produces an electromagnetic field
during operation. This field can under some
circumstances interfere with active or passive
medical implants. To decrease the risk of serious
injury or death, we recommend persons with medical
implants to speak to their physician and the medical
implant manufacturer before operating this product.
Keep the product clean. Make sure that you can
clearly read signs and decals.
Do not use the product if it is defective.
Do not do modifications to this product.
Do not operate the product if it is possible that other
persons have done modifications to the product.
Safety instructions for operation
WARNING: Read the warning instructions
that follow before you use the product.
Make sure that you know how to stop the product
quickly in an emergency.
The operator must have the physical strength that is
necessary to operate the product safely.
Use personal protective equipment. Refer to
Personal protective equipment on page 6 .
Make sure that only approved persons are in the
work area.
Keep the work area clean and bright.
Make sure that you are in a safe and stable position
during operation.
Make sure that there is no risk that you or the
product can fall from a height.
Make sure that there is no grease or oil on the
handle.
Do not use the product in areas where fire or
explosions can occur.
The product can cause objects to eject at high
speed. Make sure that all persons in the work area
use approved personal protective equipment.
Remove loose objects from the work area.
Before you go away from the product, stop the
product and disconnect the power source.
Make sure that the power outlet voltage agrees with
the voltage that is given on the rating plate of the
product.
Make sure that clothes, long hair and jewelry do not
get caught in moving parts.
Do not sit on the product.
Do not hit the product.
Make sure that you or other persons cannot get
caught in and fall on cables, hoses and shafts in the
work area.
Before you operate the product, find out if there are
hidden wires, electrical cables or other sources of
5

Advertisement

loading

This manual is also suitable for:

Vibrastar 40Vibrastar 50Vibrastar 60