3 Start
3-1
Overview
The connected reader is shown, along with its user-defined name, IP address, License Options,
Reader Model, Serial Number, MAC ID, Firmware version, WebLink version, Sensor, Optics,
Decoder, and Speed.
Note: The user-defined name must be 19 characters or fewer.
This view also allows you to choose Assisted Setup, to Create a New Setup, or to Load a Setup.
Click the gear icon at the upper right to bring up the Application Settings menu. This menu includes
several functions: Save, New, Load, Advanced, Language, Terminal, Beeper, Guided Tour, Image
Storage, Restore Default Settings, Active Account Management, and About WebLink.
Note: The Enable USB Drive Mode options only appears when you are using a device that supports
USB connectivity.
3-2
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual