Reset Procedure; Troubleshooting Steps - Thecus N4100+ Manual

0. Reset the IP Address and admin password to default setting.
a) Power on the N4100+ and immediately press the Reset button for 10
seconds.
b) This resets the N4100+ to its default IP address and password settings.
Default IP: 192.168.1.100
Default admin password: admin
2. Power LED
glows blue but Busy LED
never blinks?
4. Admin login &
RAID status OK?
N4100+ simple diagnosis flowchart
N4100+ simple diagnosis flowchart
1. Insert at least one
HDD, attach the
power cord and
connect LAN cable
N
3. Set the IP address
of PC or NB as
192.168.1.111, and
then login NAS
Y
NAS is OK
supply unit
Firmware
corrupted
Y
(MB is bad)
MB is bad
5. Power LED
N glows blue, system fan works,
and power fan works?
3/3
.
Power
is bad
N
Y
10/23/2008