Grandstream Networks WP810 Administration Manual page 50

Always Authenticate
Before Challenge
Validate Hostname in
Certificate
Allow DHCP Option 43
and Option 66 Override
Server
Additional Override
DHCP Option
Allow DHCP Option
120 to override SIP
Server
Automatic Upgrade
Randomized Automatic
Upgrade
Hour of the Day (0-23)
Day of the Week (0-6)
Disable SIP NOTIFY
Authentication
Config
Config Upgrade Via
Config Server Path
Config Server
Username
Config Server
Password
Config File Prefix
Only applies to HTTP/HTTPS. If enabled, the phone will send credentials
before being challenged by the server. The default setting is "No".
To validate the hostname in the SSL certificate
Default setting is "Yes". DHCP option 66 originally was only designed for
TFTP server. Later on it was extended to support an HTTP URL. WP phones
support both TFTP and HTTP server via option 66. Users can also use
DHCP option 43 vendor specific option to do this.
DHCP option 43 approach has priorities. The phone is allowed to fall back
to the original server path configured in case the server from option 66 fails.
When enabled, users could select Option 150 or Option 160 to override the
firmware server instead of using the configured firmware server path or the
server from option 43 and option 66 in the local network. Please note this
option will be effective only when option "Allow DHCP Option 43 and Option
66 to Override Server" is enabled. The default setting is "None".
Enables DHCP Option 120 from local server to override the SIP Server on
the phone. The default setting is "No".
Enables automatic upgrade and provisioning. The default setting is "No".
Randomized Automatic Upgrade within the range of hours of the day or
postpone the upgrade every X minute(s) by random 1 to X minute(s).
Defines the hour of the day to check the HTTP/TFTP/FTP server for
firmware upgrades or configuration files changes. The default value is 1.
Defines the day of the week to check HTTP/TFTP/FTP server for firmware
upgrades or configuration files changes. The default value is 1.
Device will not challenge NOTIFY with 401 when set to "Yes".
Default setting is "No".
Allows users to choose the config upgrade method: TFTP, FTP, FTPS,
HTTP or HTTPS. The default setting is "HTTPS".
Defines the server path for provisioning.
The username for the config server.
The password for the config server.
Enables your ITSP to lock configuration updates. If configured, only the
configuration file with the matching encrypted prefix will be downloaded and
flashed into the phone.
WP810 Administration Guide
Version 1.0.1.1
P a g e | 50