Removing The Battery Pack; Installing The Battery Pack - Toshiba NB500 Series User Manual

■
Do not touch the battery release latch while holding the computer or the
battery pack might fall out due to the unintentional release of the battery
release latch and cause injuries.

Removing the battery pack

To remove a discharged battery, follow the steps as detailed below:
1. Save your work.
2. Turn the computer's power off - ensure that the Power indicator is off.
3. Remove all cables and peripherals that are connected to the computer.
4. Close the display panel and turn the computer upside down.
5. Slide the battery lock (1) into its (
6. Slide and hold the battery release latch (2) to disengage the battery
pack and then remove it from the computer (3).
1. Battery lock
2. Battery release latch

Installing the battery pack

To install a battery pack, follow the steps as detailed below:
Do not touch the battery release latch while holding the computer or the
battery pack might fall out due to the unintentional release of the battery
release latch and cause injuries.
1. Insert the battery pack as far as it will go into the computer.
2. Ensure that the battery pack is securely in place and the battery lock is
in its lock (
3. Turn your computer over.
User's Manual
NB500/NB505/NB520/NB525/NB550D/NB555D Series
Figure 5-1 Releasing the battery pack
3. Battery pack
) position.
) position.
5-8