Turning On The Power; Starting Up For The First Time - Toshiba NB500 Series User Manual

■
When opening or closing the display panel, place one hand on the palm
rest to hold the computer in place and use the other hand to slowly
open or close the display panel (Do not use excessive force when
opening or closing the display panel).

Turning on the power

This section describes how to turn on the power - the Power indicator will
then indicate the status. Please refer to the
section in Chapter 5, Power and Power-Up Modes for more information.
■
After you turn on the power for the first time, do not turn it off until you
have set up the operating system.
■
Volume cannot be adjusted during Windows Setup.
1. Open the display panel.
2. Press and hold the computer's power button for two or three seconds.
1. Power button

Starting up for the first time

The Windows 7 Startup Screen will be the first screen displayed when you
turn on the power. Follow the on-screen instructions on each screen in
order to properly install the operating system.
User's Manual
NB500/NB505/NB520/NB525/NB550D/NB555D Series
Figure 1-5 Turning on the power
Monitoring of power condition
1-6