Toshiba NB 100 User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. NB 100 Series
  6. User manual

Toshiba NB 100 User Manual

Hide thumbs Also See for NB 100:
Table of Contents

Advertisement

Quick Links

See also: Maintenance Manual , User Manual
User's Manual
NB 100 Series
computers.toshiba-europe.com

Advertisement

Table of Contents
loading

Related Manuals for Toshiba NB 100

Summary of Contents for Toshiba NB 100

  • Page 1 User’s Manual NB 100 Series computers.toshiba-europe.com...
  • Page 2 This manual has been validated and reviewed for accuracy. The instructions and descriptions it contains are accurate for the TOSHIBA NB 100 Series Portable Personal Computer at the time of this manual’s production. However, succeeding computers and manuals are subject to change without notice.
  • Page 3 "CE" and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC and/or R&TTE Directive 1999/5/EC. Responsible for CE marking:TOSHIBA EUROPE GMBH, Hamfeldamm 8, 41460 Neuss, Germany. Manufacturer:Toshiba Corporation, 1-1 Shibaura 1-chome, Minato-ku, Tokyo, 105-8001, Japan.
  • Page 4 For more detailed information about the collection and recycling programmes available in your country, please visit our website (http://eu.computers.toshiba-europe.com) or contact your local city office or the shop where you purchased the product. This symbol may not be displayed depending on the country and region where you purchased.

  • Page 5: Energy Star Program

    To conserve energy, your computer is set to enter the low-power Suspend Mode which shuts down the system and display within 15 minutes of inactivity in AC power mode. TOSHIBA recommends that you leave this and other energy saving features active, so that your computer will operate at its maximum energy efficiency.

  • Page 6: Table Of Contents

    TOSHIBA Disc Creator ........
  • Page 7 TOSHIBA support ........

  • Page 8: Specifications

    NB 100 Series Copy protection ......... 10-3 USB Sleep and Charge.

  • Page 9: Manual Contents

    This powerful, lightweight notebook computer is designed to provide years of reliable, computing. This manual tells you how to set up and begin using your NB 100 Series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
  • Page 10 NB 100 Series Chapter 6, Power and Power-up Modes, gives details on the computer’s power resources and battery save modes. Chapter 7, BIOS Setup and Passwords, explains how to configure the computer using the BIOS Setup program. It also tells how to set a password.
  • Page 11 NB 100 Series Key operation Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus sign (+). For example, Ctrl + C means you must hold down Ctrl and at the same time press C.
  • Page 12 NB 100 Series User’s Manual...

  • Page 13: General Precautions

    NB 100 Series General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
  • Page 14 NB 100 Series Creating a computer-friendly environment Place the computer on a flat surface that is large enough for the computer and any other items you are using, such as a printer. Leave enough space around the computer and other equipment to provide adequate ventilation.

  • Page 15: Instruction Manual For Safety And Comfort

    NB 100 Series Mobile phones Please be aware that the use of mobile phones can interfere with the audio system. The operation of the computer will not be impaired in any way, but it is recommended that a minimum distance of 30cm is maintained between the computer and a mobile phone that is in use.
  • Page 16 NB 100 Series User’s Manual...

  • Page 17: Introduction

    Wireless LAN driver (Can be used only for Wireless LAN models= ■ TOSHIBA DVD PLAYER ■ TOSHIBA ConfigFree ■ TOSHIBA Disc Creator ■ TOSHIBA 3G RF Power Control Utility (Can be used only for 3G models) ■ TOSHIBA User’s Manual User’s Manual...

  • Page 18: Features

    NB 100 Series Documentation ■ TOSHIBA NB 100 Series User’s Manual ■ TOSHIBA NB 100 Series Quickstart ■ Instruction Manual for Safety and Comfort ■ Warranty information If any of the items are missing or damaged contact your dealer immediately.

  • Page 19: Pointing Device

    Introduction ® Mobile Intel 945GSE Express Chipset Video RAM capacity shares with main memory, and the proportion depends on Dynamic Video Memory Technology. Memory (main system)*2 For more information regarding Memory (Main System), please refer to the Disclaimer section in Chapter 10 or click the *2 above. Disks Hard disk drive (HDD) The computer has one or two integrated, 2 1/2"...
  • Page 20 NB 100 Series RTC battery The internal RTC battery backs up the Real Time Clock (RTC) and calendar. AC adaptor The universal AC adaptor provides power to the system and recharges the batteries when they are low. It comes with a detachable power cord.

  • Page 21: Special Features

    Connects a security lock to anchor the computer to a desk or other large object. Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use.. Hot keys...
  • Page 22 NB 100 Series Display automatic This feature automatically cuts off power to the power off internal display when there is no keyboard input for a time specified. Power is restored when any key is pressed. HDD automatic power This feature automatically cuts off power to the hard disk drive when it is not accessed for a time specified.

  • Page 23: Utilities

    This software is provided for playback of DVD PLAYER Video. (This software is preinstalled in some modelsl) TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication devices and network connections. ConfigFree also allows you to find communication problems and create profiles for easy switching between location and communication networks.

  • Page 24: Options

    945GSE Express chipset. Battery Pack An additional battery pack 4 cell Type can be purchased from your TOSHIBA dealer. The battery pack is identical to the one that came with your computer. Use it as a spare or replacement. Universal AC adaptor If you use your computer at more than one site, it...

  • Page 25: Chapter 2 The Grand Tour

    The Grand Tour Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Non-applicable icons*8 For more information regarding Non-applicable icons, please refer to the Disclaimer section in Chapter 10 or click the *8 above. Front with the display closed Figure below shows the computer’s front with its display panel in the closed position.

  • Page 26: Left Side

    NB 100 Series Left side Figure below shows the computer’s left side. Security lock slot USB port The left side of the computer Universal serial The universal serial bus (USB) port comply with bus (USB 2.0) ports USB Serial 2.0 standards, which enables data transfer speeds 40 times faster than the USB 1.1...

  • Page 27: Right Side

    The Grand Tour Right side Figure below shows the computer’s right side. SIM card slot* Bridge media card slot Fan vent USB ports *Depending on the model you purchased The right side of the computer Bridge media card This slot lets you easily transfer data from devices, slot such as digital camera and PDA, that use flash memory.

  • Page 28: Back Side

    NB 100 Series Back side Figure below shows the computer’s back side. External monitor port LAN jack DC IN 19V The computer’s back side External monitor This 15-pin port allows you to connect an external port monitor. LAN jack This jack lets you connect to a LAN. The adaptor...
  • Page 29 Chapter 6, Power and Power-up Modes, describes how to access the battery pack. Additional battery packs can be purchased from your TOSHIBA dealer to extend the computer’s battery operating time.. Battery release Slide this latch to release the battery pack.

  • Page 30: Front With The Display Open

    NB 100 Series Front with the display open Figure below shows the front of the computer with the display open. To open the display, lift the display up and position the display at a comfortable viewing angle. Wireless Lan Antenna...
  • Page 31 The Grand Tour Stereo speaker The speaker emits sound generated by your software as well as audio alarms, such as low battery condition, generated by the system. Touch pad Moves the pointer and selects or activates items on the screen. Can be set to perform other mouse functions, such as scrolling, selecting, and double- clicking.

  • Page 32: System Indicators

    NB 100 Series System indicators Figure below shows the system indicators, which light when various computer operations are in progress. Caps Lock wireless WAN* Numeric Lock Power Main battery Wireless Lan / Buluetooth *Depending on the model you purchased System indicators...

  • Page 33: Ac Adaptor

    The Grand Tour AC adaptor The AC adaptor converts AC power to DC power and reduces the voltage supplied to the computer. It can automatically adjust to any voltage from 100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to use the computer in almost any region.
  • Page 34 NB 100 Series 2-10 User’s Manual...

  • Page 35: Chapter 3 Getting Started

    Getting Started Chapter 3 Getting Started This chapter provides basic information to start using your computer. It covers the following topics: ■ All users should be sure to carefully read the sections Microsoft ® Windows XP setup, which describe actions to take when you turn on the power for the first time.

  • Page 36: Connecting The Ac Adaptor

    ■ Always use the TOSHIBA AC adaptor that was included with your computer or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.
  • Page 37 Getting Started 1. Connect the power cord to the AC adaptor. Connecting the power cord to the AC adaptor 2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on the back side of the computer. DC IN jack Connecting the adaptor to the computer 3.

  • Page 38: Opening The Display

    NB 100 Series Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. To open the display, lift the panel up and adjust it to the best viewing angle. When you open the display, be sure to hold the base firmly and lift up the monitor slowly.

  • Page 39: Turning On The Power

    Getting Started Turning on the power This section describes how to turn on the power After you turn on the power for the first time, do not turn it off until you have set up the operating system (OS) and the OS has started up 1.

  • Page 40: Hibernation Mode

    NB 100 Series ■ Make sure the Hard Disk Drive indicator is off. If you turn off the power while a disk (disc) is being accessed, you may lose data or damage the disk. ■ Never turn off the power while an application is running. Doing so could cause loss of data.

  • Page 41: Starting Hibernation Mode

    Getting Started Starting hibernation mode To enter hibernation mode, follow the steps below. 1. Click Windows Start button. 2. Select Turn Off Computer. 3. Open the Turn Off Computer dialog box. 4. Select Hibernate. You can also enable hibernation mode by pressing Fn + F2 - please refer to Chapter 5, Keyboard, for further details.

  • Page 42: Restarting The Computer

    NB 100 Series ■ Saves power by shutting down the system when the computer receives no input or hardware access for the duration set by the system Standby feature. ■ You can use the panel power off feature. Executing standby mode You can enter sleep mode in one of three ways: 1.

  • Page 43: System Recovery Options

    Getting Started System recovery options Restoring the preinstalled software from the Product Recovery disc You can use TOSHIBA Product Recovery Disc when you connect External ODD. ■ When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost.
  • Page 44 NB 100 Series 3-10 User’s Manual...

  • Page 45: Chapter 4 Operating Basics

    Operating Basics Chapter 4 Operating Basics This chapter gives information on basic operations including using the touchpad, Audio/Video controls, the web camera, the microphone, Wireless communication and LAN. Using the touchpad To use the touchpad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go.

  • Page 46: Toshiba Disc Creator

    CD Player' function to record music to DVD-R, DVD-R DL,DVD-RW, DVD+R, DVD+R DL, or DVD+RW media. ■ Do not use the 'Disc Backup' function of TOSHIBA Disc Creator in order to copy DVD Video, or DVD-ROM material that has copyright protection.

  • Page 47: Data Verification

    2. Mark the Verify written data check box. 3. Select File Open or Full Compare mode. 4. Click the OK button. How to learn more about TOSHIBA Disc Creator ■ Please refer to the Help files for additional TOSHIBA Disc Creator information. User’s Manual...

  • Page 48: Using The Web Camera

    NB 100 Series Using the web camera Built-in web camera is provided with some models. The section in the Online manual describes the bundled webcam utility, which can capture still and video images. The web camera will auto-run when Windows starts.
  • Page 49 Operating Basics Video recording Audio recording Capture still images Function Display window Camera resolution Effects Mute Using the Software Capture Still Image Click to see a preview of the captured image; you can also e-mail the image. Video Recording Click to prepare for recording. Click again to start recording.

  • Page 50: Using The Microphone

    Be sure to enable encryption function. Otherwise your computer will allow the illegal access by outsider through wireless LAN to cause illegal instruction, eavesdropping, and loss or destruction of stored data. TOSHIBA strongly recommends the customer to enable the encryption function. User’s Manual...

  • Page 51: Worldwide Operation

    Operating Basics ■ TOSHIBA is not liable for the eavesdropping of data due to the use of Wireless LAN and the damage thereof. Bluetooth wireless technology Bluetooth wireless technology eliminates the need for cables between electronic devices such as desktop computers, printers and mobile phones.

  • Page 52: Lan

    NB 100 Series Indicator glows Wireless communication hot keys are on. Wireless LAN is turned on by an application. If you used the Task Bar to disable Wireless LAN, restart the computer or follow the procedures below to enable the system to recognize Wireless LAN.

  • Page 53: Cleaning The Computer

    Operating Basics 2. Plug the other end of the cable into a LAN hub connector. Check with your LAN administrator before connecting to a hub. Disconnecting LAN cable To disconnect the LAN cable, follow the steps below. 1. Pinch the lever on the connector in the computer’s LAN jack and pull out the connector.

  • Page 54: Heat Dispersal

    NB 100 Series Heat dispersal To protect from overheating, the CPU has an internal temperature sensor. If the computer’s internal temperature rises to a certain level, the cooling fan is turned on or the processing speed is lowered. You can select whether to control the CPU temperature by turning on the fan first, then if necessary, lowering the CPU speed.

  • Page 55: Chapter 5 The Keyboard

    The Keyboard Chapter 5 The Keyboard The computer’s keyboard layout is compatible with a 104/105-key enhanced keyboard. Pressing Fn key an other keys can execute all enhanced keyboard function. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with.

  • Page 56: Function Keys: F1

    Soft keys: Fn key combinations The Fn (function) is unique to Toshiba computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.

  • Page 57: Hot Keys

    The Keyboard Press Fn + F12 (Scroll Lock) to lock the cursor on a specific line. The power on default is off. Press Fn + Enter to simulate Enter on the enhanced keyboard’s numeric keypad. Press Fn + Ctrl to simulate the enhanced keyboard’s right Ctrl key.
  • Page 58 The Keyboard Output Pressing Fn + F3 changes the active display device. Mute Pressing Fn + F6 turns sound on or off. When you press these hot keys, the current setting will be displayed as an icon. Silent Mode Pressing Fn + F8can activact the intelligent control of the CPU clock and voltage, adjusting fan noise effectively and extending battery power.

  • Page 59: Windows Special Keys

    The Keyboard TOSHIBA zooming Pressing Fn + S reduces the icon size on the utility (reduce) desktop or the font sizes within one of the supported application windows. TOSHIBA zooming Pressing Fn + A enlarges the icon size on the...

  • Page 60: Numeric Mode

    The Keyboard Numeric mode To turn on the Numeric mode, press Fn + F11. The Numeric mode indicator lights. Now try numeric data entry using the keys in figure 5-1. Press Fn + F11 again to turn off the overlay. The numeric keypad overlay Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard...

  • Page 61: Generating Ascii Characters

    The Keyboard Temporarily using overlay (overlay off) While using the normal keyboard, you can temporarily use the keypad overlay without turning it on: 1. Press and hold down Fn. 2. Check the keyboard indicators. Pressing Fn turns on the most recently used overlay.

  • Page 62: Chapter 6 Power And Power-Up Modes

    Power and Power-up Modes Chapter 6 Power and Power-up Modes The computer’s power resources include the AC adaptor and internal battery. This chapter gives details on making the most effective use of these resources including charging and changing battery, tips for saving battery power, and power-up modes.

  • Page 63: Power Indicators

    NB 100 Series Power on Power off (no operation) AC adaptor not Battery charge is • Operates connected above low battery • LED: Battery Green trigger point Battery charge is • Operates below low battery • LED: Battery Blinking trigger point...

  • Page 64: Battery Types

    Dispose of the battery as required by local ordinances or regulations. Use only battery recommended by TOSHIBA as replacements. The battery recharges the RTC battery. The battery maintains the state of the computer when you enable Resume.

  • Page 65: Real Time Clock Battery

    The computer’s RTC battery is a lithium ion battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations...

  • Page 66: Charging The Battery

    The Battery indicator glows blinking green slow when the battery is being charged. Use only the computer connected to an AC power source or the optional TOSHIBA battery charger to charge the battery pack. Never attempt to charge the battery pack with any other charger User’s Manual...

  • Page 67: Battery Charging Notice

    NB 100 Series Time The following table shows the approximate time required to fully charge a discharged battery. Charging time (hours) Battery type Power on Power off Battery pack (4 cell) 4 hours or more 4 hours RTC battery 24 hours...

  • Page 68: Monitoring Battery Capacity

    Power and Power-up Modes Monitoring battery capacity Remaining battery power can be monitored in Power Options. Wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time. The computer needs this time to check the battery’s remaining capacity and to calculate the remaining operating time, based on the current power consumption rate and remaining battery capacity.

  • Page 69: Replacing The Battery Pack

    NB 100 Series Retention Time Battery type State and Retention Time Battery pack (4 cell) about 3 hours (standby mode) about 14 days (shutdown mode) RTC battery about 3 months Extending battery life To maximize the life of your battery packs: ■...

  • Page 70: Removing The Battery Pack

    Power and Power-up Modes Removing the battery pack To remove a discharged battery, follow the steps as detailed below: ■ When handling battery pack, be careful not to short circuit the terminals. Also do not drop, hit or otherwise apply impact; do not scratch or break the casing and do not twist or bend the battery pack.

  • Page 71: Installing The Battery Pack

    7. Pull the battery pack forward to remove it. For environmental reasons, do not throw away a spent battery pack. Please return spent battery pack to your TOSHIBA dealer. Installing the battery pack To install a battery pack, follow the steps below.

  • Page 72: Starting The Computer By Password

    Power and Power-up Modes Starting the computer by password If you have already registered a password, please enter the password manually to start the computer: To start up the computer with the user password, follow these steps: 1. Turn on the power as described in Chapter 3, Getting Started.
  • Page 73 NB 100 Series 6-12 User’s Manual...

  • Page 74: Chapter 7 Bios Setup And Passwords

    BIOS Setup and Passwords Chapter 7 BIOS Setup and Passwords This chapter explains how to use BIOS to set up user and supervisor passwords. Accessing BIOS Setup Menu To start the utility, please press "F2" to enter the BIOS Setup Menu when boot up the computer.

  • Page 75: Boot Priority

    BIOS Setup and Passwords Password User Password / Supervisor Password This option allows you to set or reset the user password for power on. To enter a user password: 1. Enter a password of up to 10 characters. The character string you enter is displayed as a string of asterisks.

  • Page 76: Usb Sleep And Charge

    BIOS Setup and Passwords Use this option to enable or disable USB Legacy Emulation. If your operating system does not support USB, you can still use a USB mouse and keyboard by setting the USB Legacy Emulation item to enabled. Enabled Enables the USB Legacy Emulation.
  • Page 77 BIOS Setup and Passwords Metal paper clips or hair pins/clips will generate heat if they come into contact with USB ports. Do not allow USB ports to come into contact with metal products, for example when carrying the computer in your bag. The default setting is [Disabled].

  • Page 78: Chapter 8 Optional Devices

    Optional Devices Chapter 8 Optional Devices Optional devices can expand the computer’s capabilities and its versatility. The following optional devices are available from your TOSHIBA dealer: Cards/Memory ■ SD, MS, MS Pro memory cards ■ Memory expansion ■ SIM card Power devices ■...
  • Page 79 Optional Devices See below for the card capacities: Card Type Capacities 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB MS Pro 256 MB, 512 MB, 1 GB, 2 GB The Logo of SD Memory card is...
  • Page 80 Optional Devices ■ Keep foreign objects out of the bridge media card slot. A pin or similar object can damage the computer's circuitry. ■ Make sure the SD/MS/MS Pro Card is oriented properly before you insert it. ■ Memory Stick Duo/PRO Duo and the Memory Stick adaptor are not compatible with the bridge media card slot.

  • Page 81: Memory Expansion

    Optional Devices ■ Make sure the bridge media card slot indicator is out before you remove the card or turn off the computer’s power. If you remove the card or turn off the power while the computer is accessing the card you may lose data or damage the card.
  • Page 82 Optional Devices Removing the cover 6. Insert the memory module into the connector on the computer. Press the module carefully and firmly to ensure a solid connection. 7. Push the module down so that it lies flat and is secured by two latches.

  • Page 83: Removing Memory Module

    Optional Devices Pushing the memory module down 8. Seat the cover and secure it with one screw. 9. When you turn the computer on, it should automatically recognize the total memory capacity. If it is not recognized, check the module’s con- nection.

  • Page 84: Sim Card

    Optional Devices Removing the memory module 7. Seat the cover and secure it with one screw. SIM card Some models are equipped with a SIM card slot that can accommodate a sim card. Installing a SIM card To install a SIM card, follow the steps below. 1.

  • Page 85: Additional Ac Adaptor

    Optional Devices Removing the SIM card To remove the SIM card, follow the steps below. 1. Turn the computer off in boot mode. Refer to the Turning off the power section in Chapter 3. 2. Remove all cables connected to the computer. 3.

  • Page 86: Security Lock

    Optional Devices Security lock A security lock enables you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer. Attach one end of a cable to the desk and the other end to the security lock slot on the right or left side of the computer.

  • Page 87: Troubleshooting

    Troubleshooting Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.

  • Page 88: Analyzing The Problem

    NB 100 Series ■ Inspect all connecting cables for loose wires and all connectors for loose pins. ■ Check that your diskette is correctly inserted and that the diskette’s write protect tab is correctly set. Make notes of your observations and keep them in a permanent error log.

  • Page 89: Hardware And System Checklist

    When the computer starts up, the self-test will be run automatically, and the following will be displayed: TOSHIBA Leading Innovation>>> This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system.

  • Page 90: Overheating Power Down

    NB 100 Series Power When the computer is not plugged into an AC adaptor, the battery pack is the primary power source. However, your computer has a number of other power resources, including intelligent power supply and Real Time Clock battery.
  • Page 91 Troubleshooting Problem Procedure Battery doesn’t charge If the battery is completely discharged, it will not when the AC adaptor is begin charging immediately. Wait a few minutes. attached (Battery If the battery still does not charge, make sure the indicator does not glow outlet is supplying power.

  • Page 92: Lcd Panel

    NB 100 Series Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard and Chapter 7, BIOS Setup Passwords. Problem Procedure Some letter keys Check that the numeric keypad overlay is not produce numbers selected.
  • Page 93 Troubleshooting Problem Procedure Slow performance Your files may be fragmented. Run SCANDISK and defragmenter to check the condition of your files and disk. Refer to your OS documentation or online HELP for information on running SCANDISK and the defragmenter. As a last resort, reformat the hard disk. Then, reload the operating system and other files.

  • Page 94: Usb Mouse

    NB 100 Series Problem Procedure When the reaction of Adjust the touch Sensitivity. touchpad is sensitive to 1. Open the Control Panel. slow 2. Click the Printers icon and Other Hardware icon. 3. Click the Mouse icon. 4. Click the Device Setting tab.
  • Page 95 Troubleshooting Problem Procedure The mouse pointer The mouse might be dirty. Refer to your mouse moves erratically documentations for instructions on cleaning. If problems persist, contact your dealer. SD/MS/MS Pro Card Refer also to Chapter 8, Optional Devices. Problem Procedure Memory card error Reseat the memory card to make sure it is firmly occurs...

  • Page 96: Sound System

    NB 100 Series Problem Procedure Display error occurs Check that the cable connecting the external monitor to the computer is attached firmly. If problems persist, contact your dealer. Sound system Problem Procedure No sound is heard Check the software volume settings.
  • Page 97 Troubleshooting Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN HUB. Wake-up on LAN Make sure the AC adaptor is connected. The does not work Wake-up on LAN function consumes power even when the system is off. If problems persist, consult your LAN administrator.

  • Page 98: Toshiba Support

    NB 100 Series TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system so it is important that you investigate other sources of assistance first.

  • Page 99: Cpu*1

    5°C to 30°C (41°F to 86°F) or > 25°C (77°F) at high altitude (all temperature references are approximate and may vary depending on the specific computer model-please refer to your PC documentation or visit the Toshiba website at http://www.pcsupport.toshiba.com for details).

  • Page 100: Memory (Main System)*2

    This is a normal phenomenon for all batteries. To purchase a new battery pack, see the accessories information that is shipped with your computer, or visit the Toshiba web site at http://www.pcsupport.toshiba.com. HDD drive capacity 1 Gigabyte (GB) means 10 = 1,000,000,000 bytes using powers of 10.

  • Page 101: Lcd*5

    Disclaimers Over a period of time, and depending on the usage of the computer, the brightness of the LCD screen will deteriorate. This is an intrinsic characteristic of LCD technology. Graphics Processor Unit (GPU) Graphics processor unit (GPU) performance may vary depending on product model, design configuration, applications, power management settings and features utilized.

  • Page 102: Physical Dimensions

    Specifications Appendix A Specifications This appendix summarizes the computer’s technical specifications. Physical Dimensions Size With Battery 225(w) x 190.5(d) X 29.5 / 33(h) millimeters (not including parts that extend beyond the main body) Without Battery 225(w) x 178(d) x 29.5 / 33(h) millimeters (not including parts that extend beyond the main body) Environmental requirements Operating...
  • Page 103 Display Controller Appendix B Display Controller Display controller The display controller interprets software commands into hardware commands that turn particular pixels on or off. The controller is an advanced Video Graphics Array (VGA) that provides Super VGA (SVGA) and Extended Graphics Array (XGA) support for the internal LCD and external monitors.

  • Page 104: Card Specifications

    Wireless LAN Appendix C Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card specifications Form Factor ■ Mini Card Compatibility ■ IEEE 802.11 Standard for Wireless LANs ■...
  • Page 105 Subject to the radio regulations that apply in your country/region, your Wireless LAN card may support a different set of 2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in your country/region.
  • Page 106 Wireless LAN ■ In a Wireless LAN Access Point, the Wireless LAN card will use the factory-set default channel(printed in bold), unless the LAN Administrator selected a different channel when configuring the Wireless LAN Access Point device. Factory-set default channels Refer to the sheet Approved Countries/Regions for use for the countries/regions that in which these channels can be used.

  • Page 107: Ac Power Cord And Connectors

    AC Power Cord and Connectors Appendix D AC Power Cord and Connectors The AC input plug of power cord must be compatible with various international AC power outlets. Power cords need to meet the local standards and the specifications listed as below: Length: Minimum 1.7 meters Wire size:...
  • Page 108 NB 100 Series The following illustrations show the plug shapes for USA, Australia, Canada, United Kingdom, Europe, and China. United Kingdom UL approved BS approved Australia Europe AS approved Approved by the appropriate agency China Canada CCC approved CSA approved...

  • Page 109: If Your Computer Is Stolen

    What is your address, phone, and fax number? To register the theft on paper, please follow these procedures: ■ Fill in the TOSHIBA Theft Registration form (or a copy of it) below. ■ Attach a copy of your receipt showing where your computer was purchased.

  • Page 110: Toshiba Theft Registration

    TOSHIBA Europe GmbH Technical Service and Support Leibnizstr. 2 93055 Regensburg Germany Fax number: +49 (0) 941 7807 921 Country stolen: Machine type: (e.g. NB 100 Series) Model number: (e.g. PSA30EYXT) Serial number: (e.g. 12345678G) Date stolen: Year Month Owner’s details...
  • Page 111 Glossary Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port ANSI: American National Standards Institute APM: advanced power manager ASCII: American Standard Code for Information Interchange BIOS: basic input output system CD-ROM: Compact Disc Read Only Memory CD-RW: Compact Disc ReWritable...
  • Page 112 Glossary IDE: integrated drive electronics I/O: input/output IrDA: Infrared Data Association IRQ: interrupt request KB: kilobyte LCD: liquid crystal display LED: light emitting diode LSI: large scale integration MB: megabyte OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect RAM: random access memory RGB: red, green, and blue ROM: read only memory...
  • Page 113 Glossary analog signal: A signal whose characteristics such as amplitude and frequency vary in proportion to (are an analog of) the value to be transmitted. Voice communications are analog signals. ANSI: American National Standards Institute. An organization established to adopt and define standards for a variety of technical disciplines. For example, ANSI defined the ASCII standard and other information processing requirements.
  • Page 114 Glossary byte: The representation of a single character. A sequence of eight bits treated as a single unit; also the smallest addressable unit within the system. cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory.
  • Page 115 Glossary components: Elements or parts (of a system) which make up the whole (system). Composite Video (YUV): A standard video signal used to transmit images, e.g. from a VCR to a TV. computer program: A set of instructions written for a computer that enable it to achieve a desired result.
  • Page 116 Glossary disk drive: The device that randomly accesses information on a disk and copies it to the computer’s memory. It also writes data from memory to the disk. To accomplish these tasks, the unit physically rotates the disk at high speed past a read-write head. disk storage: Storing data on magnetic disk.
  • Page 117 (FDD): An electromechanical device that reads and writes to floppy diskettes. Fn-esse: A TOSHIBA utility that lets you assign functions to hot keys. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk.
  • Page 118 Glossary hardware: The physical electronic and mechanical components of a computer system: typically, the computer itself, external disk drives, etc. See also software and firmware. hertz: A unit of wave frequency that equals one cycle per second. hexadecimal: The base 16 numbering system composed of the digits 0 through 9 and the letters A, B, C, D, E, and F.
  • Page 119 Glossary K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. See also byte and kilobyte. KB: See kilobyte. keyboard: An input device containing switches that are activated by manually pressing marked keys.
  • Page 120 Glossary monitor: A device that uses rows and columns of pixels to display alphanumeric characters or graphic images. See also CRT. motherboard: A name sometimes used to refer to the main printed circuit board in processing equipment. It usually contains integrated circuits that perform the processor’s basic functions and provides connectors for adding other boards that perform special functions.
  • Page 121 The electrical connection through which the computer sends and receives data to and from devices or other computers. Power Saver Utility: A TOSHIBA utility that lets you set the parameters for various power-saving functions. printed circuit board (PCB): A hardware component of a processor to which integrated circuits and other components are attached.
  • Page 122 Glossary ROM: Read Only Memory: A nonvolatile memory chip manufactured to contain information that controls the computer’s basic operation. You cannot access or change information stored in ROM. S-Video: Short for Super-Video, a type of connection used by S-VHS videocassette players, camcorders, DVD players, etc. to transmit high-quality video signals.
  • Page 123 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. touchpad: A pointing device integrated into the TOSHIBA computer palm rest. TTL: Transistor-transistor logic. A logic circuit design that uses switching transistors for gates and storage.
  • Page 124 Index Index Bluetooth, 1-5, 4-7 indicator, 4-7 AC adaptor, 1-4, 2-4, A-1 problems, 9-11 additional, 8-8 Bridge media card slot, 1-4, 8-1 connecting, 3-2 problems, 9-4 safety instructions, -xiii Checklist ASCII characters, 5-7 equipment, 1-1 Auto power on, See Power problems, 9-1, 9-3 Cleaning the computer, 4-9 Battery...
  • Page 125 Hot keys, 1-5 brightness down, 5-4 Fn + ~, 5-3 brightness up, 5-4 Fn + 1(Speaker Up), 5-4 Output, 5-4 FN + 2 (TOSHIBA zooming TOSHIBA zooming utility utility enlarge), 5-5 enlarge, 5-5 Fn + Alt (enhanced keyboard TOSHIBA zooming utility...
  • Page 126 SD/MS/MS Pro Card, 9-9 Pointing device self test, 9-3 touchpad, 4-1 sound system, 9-10 Ports system start-up, 9-3 external monitor, 1-4, 2-4 TOSHIBA support, 9-12 headphone, See Sound touchpad, 9-7 system USB, 9-10 LAN, 2-4 USB mouse, 9-8 USB, 1-4, 2-2, 2-3...
  • Page 127 Zoom, 5-3 Speaker Up, 5-4 Standby, 1-7 Standby/Hibernation, 9-10 Starting the computer by password, 6-11 Supend mode, 3-7 TOSHIBA Bluetooth Stack, 1-7 TOSHIBA Disc Creator, 4-2 TOSHIBA support, 9-12 TOSHIBA Theft Registration, TOSHIBA zooming utility (enlarge), 5-5 TOSHIBA zooming utility...

Table of Contents