User Password - Toshiba NB500 Series User Manual

General
This window displays the BIOS/EC version and contains two buttons :
Default and About.
Default
About
Setup
This field displays the installed BIOS version, date and EC version.
Password
This option allows you to set or reset the user password for power on.

User Password

Lets you register a new password or change/remove an existing password.
Not Registered
Registered
To enter a user password:
1. Select Registered to display the following prompt:
Enter a password of up to 8 characters. The character string you enter
is displayed as a string of asterisk.
2. Click OK. The following message appears, allowing you to verify the
password.
3. If character strings match, the password is registered. Click OK. If they
do not match, the following message appears. You must repeat from
step 1.
To delete a user password:
1. Select Not Registered to display the following prompt:
2. Enter the currently registered password. The character string you enter
is displayed as a string of asterisks.
3. Click OK. If the character string you enter matches the registered
password, the password option is reset and the display changes to:
If they do not match, the following message appears. You must repeat
from step 1.
User's Manual
Return all HW Setup values to the factory settings.
Display the HW Setup version.
Changes or remove the password. (Default)
Selects the password. A dialogue box will appear
to allow you to set the password.
Enter Password:
Verify Password:
Entry Error!!!
Enter Password:
Not registered
Incorrect Password.
NB500/NB505/NB520/NB525/NB550D/NB555D Series
4-11