Table of Contents
Advertisement
TOSHIBA SD Memory Boot Utility
In order to boot from an SD card, you must make the SD card
bootable. To do so, run the Toshiba SD Memory Boot Utility.
1
Attach a USB floppy drive to your computer, and insert a
bootable floppy disk.
2
Insert the SD card into the SD card slot.
NOTE
3
Click Start, All Programs, Toshiba, Utilities, and then
SD Memory Boot Utility.
The TOSHIBA SD Memory Boot Utility screen appears.
Sample TOSHIBA SD Memory Boot Utility screen
4
Select the drive where the SD card slot is located.
TOSHIBA SD Memory Boot Utility
Be sure to back up your data before performing this procedure
as data on the drive may be lost.
Toshiba Utilities
179
Advertisement
Table of Contents
