Table of Contents
Advertisement
Installing the SD™card in the SD slot
To insert an SD card, turn the card so that the connector
(metal area) faces down then push the card in the slot until it
locks in place.
If the operating system does not recognize an inserted SD
card, remove and insert it again.
The green light on the right side of the SD card slot will glow
when the card is being accessed.
Formatting an optional SD™ card
To format an SD card, use the Toshiba SD Memory Card
Format utility, click on Start, All Programs, Toshiba,
Utilities, and then click on SD Memory Card Format.
NOTE
Stopping or removing the SD™ card after formatting
If you have formatted the SD card drive with the Windows
operating system format (see
card" on page
card. If this occurs, try restarting the computer.
Using Standby or Hibernate while using the SD™ card
It is recommended that you do not select Standby or
Hibernation mode while an SD card is in use. If you do so,
your system may not enter Standby or Hibernation mode,
some tasks may become unresponsive, and the operating
If the SD card is not inserted into the slot correctly, any data
saved to the card may be lost.
Multi Media Cards (MMCs) are not supported by this product.
139), you may be unable to stop or eject your
Expansion Options
Using an optional SD™ card
"Formatting an optional SD™
139
®
Advertisement
Table of Contents
