Table of Contents
Advertisement
Using passwords in the Windows® operating system
Changing the master and user passwords in System Setup
To change the master and user passwords in System Setup:
1
Click Start, then click Shutdown, and click OK.
The computer shuts down.
2
Hold down the
button until the on/off light on the system indicator panel
illuminates (green) for approximately one second. When
the following message appears on the screen: "Check
system, Then press [F1] key," press
The System Setup screen appears.
3
Press
screen.
4
Use the up and down arrow keys to select the password
you wish to change.
5
Press the spacebar, then enter the appropriate password
and press
6
If you want to change your password, input the new
password.
7
When System Setup prompts you to verify the password,
type it again and press
If the two passwords match, System Setup displays:
Registered
password if a master password is registered.
8
Press
9
When System Setup prompts you to confirm your
change, Press
key and press and hold the power
Esc
to move to the HDD PASSWORD section on the
H
.
Enter
. Note that you can only change (not delete) the user
to save the change.
End
.
Y
Keeping Your Files Safe
F1
.
Enter
189
.
Advertisement
Table of Contents
