ELECTRICIAL REQUIREMENTS
Before connecting the rangehood to the power supply, ensure the voltage and frequency
indicated on the rating plate match that of the installation location:
MODEL
FREQUENCY (HZ)
HC90
50 Hz
Rating plate location
VOLTAGE (V)
230 V
PREPARE RANGEHOOD
Warning: Failure to install the screws or fixing device in accordance with these instructions
may result in an electrical hazards.
1
2
Place the ducting adapter onto the
rangehood and screw it into place
using 10mm screws.
Remove the filters – pull the catch
and tilt the filter downwards until it
disengages from the supports.
7