Yale Assure Lock Lever Touchscreen YRL226 Installation And Programming Instructions page 31

Installing the ZigBee Module
IMPORTANT: the batteries
to removing and/or inserting the network module:
• Remove battery cover.
• Remove batteries.
• Remove and/or insert network module.
• Reinstall batteries.
• Replace cover.
Enrolling/Unenrolling the Network Module:
This device is a security enabled ZigBee product that is able to use encrypted ZigBee
messages to communicate to other security enabled ZigBee products. This device must be
used in conjunction with a Security Enabled ZigBee Controller in order to fully utilize all
implemented functions. This product can be operated in any ZigBee network with other
ZigBee certified devices from other manufacturers. All non-battery operated nodes within the
network will act as repeaters regardless of vendor to increase reliability of the network.
To Enroll the Module (Inclusion Mode):
• Enter the 4-8 digit Master
• Press the key followed by the
• Press the key followed by the
To Unenroll the Module (Exclusion Mode):
• Enter the 4-8 digit Master
• Press the key followed by the
• Press the key followed by the
®
Installation and Programming Instructions
®
must be removed prior
PIN code followed by the
key.
key.
PIN code followed by the
key.
key.
Yale ZigBee Module
® ®
key.
key.
P/N AYR 202- - ZB INSTAL FUL - Rev C