Factory Defaults - Daikin TSTATD1152-2 Owner's Manual

Factory Defaults

If, for any reason, you desire to return all the stored settings back
to the factory default settings, follow the instructions below.
Enter advanced setup by sliding the Program Switch to SET. When the
clock is flashing, press the NEXT button for 5 seconds. Do not release the
button until this screen appears.
Press NEXT
to advance
NEXT
MTuWThF
SaSu
Day
Night
MTuWThF
SaSu
Day
PROGRAM
Night
RUN OFF SET
WARNING: This will reset all Time Period and Advanced Programming to
the default settings. Any information entered prior to this reset will be
permanently lost.
AM
Morning Evening
PM
SET
FILTER
AUX
HEAT
COOL
AM Morning Evening
PM
SET
FILTER
AUX
HEAT
COOL
Slide the Program Switch to OFF or RUN to return
to normal operation.
When the Cycles Per Hour is
flashing, press and hold the NEXT
button until this screen appears.
Press and hold the NEXT
button again until this
screen appears.
After restoring factory
defaults, the thermostat
screen will display all icons.
19