Mercury SC 1000 Operation And Maintenance Manual page 37

CALIBRATION
CALIBRATION
EXTERNAL SENSORS
USE GPS SPEED ?
( NO ) (SAVE)
CALIBRATION
SEA TEMP
OFFSET =
(DOWN) (SAVE)
SPEED UNITS
MPH
[DOWN] [SAVE]
DISPLAY UNITS
ENGLISH
[DOWN] [SAVE]
SIMULATOR MODE
NO
[SAVE]
[ NO ]
CALIBRATION
EXIT ?
( NO ) ( YES ) ( SCREENS )
eng
SC 1000 SPEEDOMETER
Use the GPS input to drive the speed display?
YES
Press "–" to select "NO" or "+" to select "YES."
( YES )
52684
Adjust the seawater temperature sensor to
correct display readings that are too high/low.
0 F
Press "–" or "+" to calibrate the temperature
( UP )
display "DOWN" or "UP."
23592
Changes the units in which speed is displayed.
Choose from: MPH (Miles Per Hour), KN
[ UP ]
(Knots), or KMH (Kilometers Per Hour).
23540
Changes units of measurement between
English or metric. Select "DOWN" or "UP" to
[ UP ]
change between English or metric units.
23539
Enables the simulation mode. (Used for
demonstration purposes only.)
[ YES ]
46443
Select "NO" to go through the screen selection
again, "YES" to exit the screens, or
"SCREENS" to go to the screens menu.
67265
33