Mercury SC 1000 Operation And Maintenance Manual page 16

7. Battery Voltage: Displays the voltage level (condition) of the battery. Also
records the running time of the engine.
GPH
8
4.5
9
MAINTENANCE
10
11
SPEED
12
45
BAT
13
OK
14
-
8. Fuel Flow: Displays fuel use in gallons or liters per hour, and overall
amount of fuel used.
9. Digital Tachometer: Displays the engine speed in revolutions per minute
(RPM).
10. Maintenance: Displays if the engine is "OK" or that it requires scheduled
maintenance. This maintenance screen is based on a 100 hour
maintenance cycle. Follow the maintenance schedule recommendation in
the owner's manual.
NOTE: The scheduled maintenance cycle should be reset following
maintenance performed at the Once a Year and Before Storage
recommendation that is indicated in the owner's manual.
11. Water Depth: Displays the water depth under the transducer if
connected. The water depth screen can be turned on or off in
Tachometer Screens. The alarm can be set to trigger whenever the boat
moves into water shallower than the alarm level. Refer to Tachometer
Screens for water depth alarm and offset settings.
NOTE: A depth transducer (purchased separately) must be connected to the
system for this screen to operate.
12. Speed/Temp: Displays a split screen of seawater temperature and vessel
speed.
NOTE: A speed input sensor must be connected to the system for this screen
to operate.
SC 1000 TACHOMETER
FUEL USED
12.5
3500
RPM
OK
[ENTER]
35
FT
SEA TEMP
45
MPH F
TMP PSI
OK OK
12.5
v
12
50352
eng