Mercury SC 1000 Operation And Maintenance Manual page 25

Speedometer
Table of Contents

Advertisement

CALIBRATION
CALIBRATION
TANK 2 INPUT
OIL TANK
[DOWN]
[SAVE]
CALIBRATION
OIL TANK CAPACITY
CAPACITY = 3.0 G
( DOWN )
( SAVE )
CALIBRATION
FUEL USED
(SKIP)
FUEL USED CAL :
ENTER MULTIPLIER,
OR REFUELED ?
[MULT]
FUEL USED CAL :
MULTIPLIER = 1.0
[DOWN]
[SAVE]
FUEL USED CAL :
AMOUNT
REFUELED = 0.0
[DOWN]
[SAVE]
eng
SC 1000 TACHOMETER
Select the type of tank; not installed, fuel tank
2, water tank, or waste tank. Oil tank is only
available with the OptiMax outboard.
[ UP ]
NOTE: All tanks can be calibrated as described
52652
previously.
Adjust the oil tank capacity. Press "–" to select
"DOWN," or "+" to select "UP."
( UP )
67180
Selects how fuel used is calibrated. Press "+"
to select "EDIT" or "MODE/SELECT" to
(EDIT)
bypass how the fuel used is calibrated.
52650
Selects how fuel used is calibrated with a
multiplier or with refueling. Press "–" to select
multiplier "MULT" or "+" to select refueling
[FUEL]
"FUEL."
30166
Adjusts multiplier between 0.50 and 1.50.
Press "–" to select "DOWN," or "+" to select
"UP."
The multiplier is used to fine‑tune the fuel
gauge sender to correct for fuel used errors. If
the gauge indicates that 10 gallons of fuel was
[ UP ]
used, but the actual fuel that was added is 14
30167
gallons, change the multiplier to 1.40. If the
gauge indicates that 10 gallons of fuel was
used, but the actual fuel that was added is only
8 gallons, change the multiplier to 0.80.
Adjusts fuel used calibration using the amount
of fuel replaced. Press "–" to select "DOWN,"
or "+" to select "UP."
The fuel option functions the same as the
multiplier. If the gauge indicates that 10
gallons of fuel was used, but the actual fuel
that was added is 14 gallons, change the
G
amount refueled to 14.0. If the gauge indicates
[ UP ]
that 10 gallons of fuel was used, but the actual
30168
fuel that was added is only 8 gallons, change
the amount refueled to 8.0 gallons. The gauge
will calculate the multiplier and will
automatically change the number in the
multiplier option.
21

Advertisement

Table of Contents
loading

Table of Contents

Save PDF