Sc 1000 Tachometer; System Tachometer Display Screens - Mercury SC 1000 Operation And Maintenance Manual

System Tachometer Display Screens

When the ignition is turned on, the tachometer will display the last screen that
was visible before the ignition was turned off.
Press "MODE/SELECT" to change display screens. Revert back to the
previous screen by pressing and holding "MODE/SELECT" for two seconds.
NOTE: Readings can be displayed in English (U.S.) or metric. Refer to
Tachometer Screens
NOTE: Depending on the engine model and vessel options, not all screens will
apply.
1
2
COLD
3
TRIM
4
1.5
TRIM
5
1.5
6
VOLTS
7
12.2
1. Temperature: Displays the engine coolant temperature.
2. Oil Temperature: Displays the engine oil temperature.
3. Oil Pressure: Displays the engine oil pressure in "PSI" or "BAR."
4. Trim and RPM: Displays the engine RPM and trim position.
5. Power Trim Angle: Displays the trim angle of the outboard or sterndrive
up to the maximum trim angle and then displays the trailer angle. 0 =
down, 10 = maximum trim, and 25 = full trailer.
6. Water Pressure: Displays the cooling system water pressure at the
engine.
eng

SC 1000 TACHOMETER

.
125
F
150
OIL
F
HOT
12.5
OIL
PSI
RPM
2205
WATER PSI
12.5
12.5
H20
PSI
HOURS
1.5
11
50349